Published at Saturday, February 18th 2017, 13:16:23 PM by kirby. Cupboard. Painting Kitchen Cupboards With Formica Doors One of the fastest ways to brighten up the most used room in the home is by painting the kitchen area. For years people who buy and flip homes have remodeled cupboards on the fly by applying a new coat of paint to them. When done correctly, this can be a great way upgrade the look of things. You may want to consider replacing your existing flat doors with raised panel ones. I would recommend that you find a cabinet manufacturer in your area to order them from. It would be a good idea to consider having them install the new ones because there are a few tricky things involved in the process. Tools & Materials Needed -Putty Knife -Drop Cloths -Airless Industrial Paint Sprayer (obtained from a rent-all business) -Paint Designed to Adhere to Formica Surfaces (primer & topcoat) -220 Grit Sand Paper -Wood Filler -Masking Tape -Paint Brushes and Roller -Phillips Screwdriver -Plenty of Rags -Paint Respirator Mask Be sure to set aside plenty of time to complete the project without being rushed. The more time you spend in the preparation process-the better your Formica kitchen cabinets will look when you have finished painting the cupboards. Steps for Repainting Formica Kitchen Cabinets and Doors 1. Put the drop cloths in place. Remove all of the hardware (handles or Knobs) from the cupboard doors. 2. Take the doors off of the cabinets. If you have European hinges, you may NOT even need the Phillips screwdriver for this step. Check to see if there is a release tab on the backside of the hinge. If so, pull up on the tab and the hinge should release from the mounting plate. 3. Remove the hinges from the doors. 4. Clean all surfaces with a mild solution of soap and water that are going to be painted. Thoroughly dry off all of the areas that you have washed. 5. Fill all holes that you intend to eliminate and chipped areas with the wood filler. Allow the filler to completely dry before sanding. 6. Lightly sand all of the surfaces of the cupboard door and cabinets with the 220 sandpaper that will be painted. Wipe all of the dust off of the cabinets and doors. 7. Set up an area where you can spray the primer on the backside of the cupboard doors, preferable outside. Give them one mild coat of primer. 8. While the back of the doors are drying, apply primer to the Formica cabinets using the roller and brush. When you are finished, the doors should be ready for a second coat of primer. 9. Repeat the process of painting the kitchen cupboards and doors with the primer until all areas have had two coats applied. Once the primer is completely dry, you may lightly sand all areas where ever necessary. 10. Paint two finish coats on the cupboards and the doors. 11. Hang the doors on the cabinets and insert the drawers back into their proper locations. 12. Install the old or new handles/knobs on the cabinet doors. It is advisable to not clean the kitchen cupboards for at least four days to allow plenty of time for the paint to completely cure. Our company has used a product called Cabinet Rescue for painting plastic laminate cabinets on many occasions. As previously mentioned, just check with your local hardware store professionals to find a product that is designed for refinishing Formica cupboard surfaces.
Published at Tuesday, May 16th 2017, 22:47:23 PM. Cupboard By justin. Builders Tips - Fix Cupboards BUILT-IN CUPBOARDS Nearly every residence has some built-in cupboards and often we want more of them! Whether inside the kitchen, bedroom or bathroom, theyre usually in fairly constant use and so suffer the exact same wear and tear troubles suffered by doors and windows. Kitchen cupboards in particular break from constant opening and closing and being in contact with water and heat. Built-in cupboards could be one of the additional expensive things to call a tradesperson in to build. There are some jobs the average DIYer can do around the house to fix up difficulties and update the look of their built-ins. Kitchen cupboard doors no longer line up over time, cupboard doors tends to sag, particularly the ones that get used all the time. About once a year I need to take a screwdriver to the cupboard door hinges and fine-tune them to be able to keep the doors aligned. Most doors are designed to be adjusted rapidly and very easily with nothing more than a screwdriver, as most kitchens built inside the last 30 years or so have concealed, adjustable hinges. Usually these hinges have four adjusting screws, allowing you to make three main adjustments: Lateral - the front grub screw (or set screw) adjustment permits the door to be moved side to side. Depth - loosening the back screw enables the door to be moved in or out. Vertical - the two top and bottom screws enable for adjustment of the door in an up or down direction. Youll have to experiment with the readjusting to acquire ideal alignment, but you will soon get the hang of it. Its worth noting that most of these types of hinges are manufactured in Europe and will in all probability have Pozidriv screws in them. Fixing sagging corner cupboard doors The problem with built-in kitchens is the corner cupboard, It constantly ends up a black hole where you cant find anything thats pushed up the back, and the doors, being double Sectioned, usually sag and eventually fall off. This kind of hinged door is a lot heavier than your normal cupboard door, as the hinges on the cabinet and holds the combined weight of both doors, In order to counter this extra weight and open the gap between the top of the folding door as well as the adjacent door, you must compensate by over adjusting not only the hinges that attach the doors to the cabinet but also the hinges that join the two doors together. Both hinges will have an adjustment screw that fits via a slotted hole, usually at the back of the hinge assembly. Loosen this screw slightly and then push the two parts of the hinge closer together just before re-tightening. It could possibly take a couple of attempts to get the doors to sit where you would like them. Fixing drawers Just like the rollers on sliding doors, rollers on drawer runners can get worn or damaged. Replacing the inexpensive runners or slides will have the drawers rolling like new again and is really a fairly straightforward operation: 1 - Pull the drawer forward and lift the front to remove it from the cabinet. This will give you access to both parts of the roller assembly. 2 - Removing just a couple of screws will totally free up the old mechanism. Once again, a decent hardware store should have an exact matching assembly; if not, try cabinetmakers supplies in the phonebook. 3 - These are commonly sold in pairs and you must replace both sides of your drawer at once. You will only want a screwdriver to replace the old screws into the original screw holes. Sometimes with excess pulling and over loaded drawers (or perhaps if the runners had been broken), drawer front can turn out to be loose and pull away from the rest of the drawer. If this is happening to yours: 1 - Remove the drawers and clamp the front back into position. 2 - Add some tiny metal 90 degree angle brackets to the inside of the drawer prior to it comes apart entirely. Another common complaint is the collapse of the thin baseboard inside the drawer. This will normally take place for the reason that the drawer has been overloaded. Brad is a builder in Brisbane [http://www.brisbanehomebuilder.com]. Brad writes these articles in his spare time to share some of his building and DIY knowledge. For work Brad takes on home improvement building projects in Brisbane, Rockhampton and Townsville. These project include deck building projects, renovations and home extensions.
Published at Tuesday, May 16th 2017, 21:28:23 PM. Cupboard By justin. Kitchen Cupboards: The Excellent Alternative to a Disorganized Kitchen Elegant kitchen cupboards can be created from a varied palette of natural materials to achieve a sense of height and depth. It is also important to take careful consideration of interconnecting areas and available spaces when planning to build and install cupboards for your kitchen. In order to establish a sense of height choose to install cupboards that are tall and choose materials that has an intentionally horizontal grain such as wood. Talented kitchen designers have designed modern kitchens utilizing wood beams to create a point of difference. Wooden cupboards come in a variety of stains that exudes a certain depth and warmth. Kitchen cupboards with cigar box style are mostly preferred for wooden kitchens. Most designers also use the layered materials technique to create a beautiful texture and colours that shows fantastic craftsmanship. Doing a make-over for a large and roomy kitchen is easier than working in a smaller room, but you also have to look at the long list of requirements and specifications where it would seem a daunting task to achieve aesthetically cohesive plan. A lot of effort is needed in designing a perfect layout that would fit several furnishings and appliances and substantial storage space and at the same time shun a warehouse effect or feeling. Another pertinent factor is to see to it that all the elements relate to each other in order to give a functional and user-friendly kitchen space. The most adept kitchen design results from a joint effort from the designer and the homeowner during the early stages of construction. Your kitchen cupboard maker should also collaborate with your kitchen designer so they can agree on the best type of design, materials and style. Their wise planning assures you and your family of having the kitchen that you have been dreaming of. Kitchen cupboards are the excellent alternative to disorganized kitchen and cluttered counters. An intelligently planned kitchen cabinetry will help you accomplish that objective of getting well-organized kitchen at all times. Ensure that accurate measurements are taken since sizes and spacing should be a primary concern in order to come up with cabinets that are not too confined or too far apart and difficult to work with. It should come out interesting and practical. Perfectly designed and well thought of kitchen cabinets can be the focal point of a kitchen. Whatever design you have in mind when it comes to your kitchen cabinet, have it installed taking into consideration every inch of that empty wall space. Like most homeowners, you should give some thought on your requirements in order to come up with the ideal kitchen cupboards that will suit your indoor or outdoor kitchen. Its also nice to use decorative hardware for your cupboards but make sure to pick something that perfectly matches the colour and texture of the cabinets. Whether you want a clean and timeless appearance, conventional or modern, the important factor to consider is to have a functional and organized kitchen. Dont forget to set yourself a budget for this project to avoid overspending.
Published at Tuesday, May 16th 2017, 20:06:23 PM. Cupboard By justin. Painting Kitchen Cupboards White Painting kitchen cupboards is a time consuming task which can be done easily by knowing few professional home decoration procedures. So, lets explore these techniques in this article. In case your kitchen cupboards have began to show few wear signs then they surely need repainting. Or else if youre older cupboards that were done with dark stains need up-gradation to look modern then be well-prepared for a difficult and time consuming task. Cupboards are just not easy for painting as ceilings and walls. There exist numerous shelves, drawers and doors to assert along with the tight-interior areas that would be hard for working on. Firstly, for painting kitchen cupboards properly, you need to clean-out all contents to carefully wipe-down the entire surfaces using a damp, clean cloth to remove the spilled oils or food stuffs and dust. To do it professionally, you need to remove every cupboard doors along with their handles or knobs and hinges and to take-out all drawers & drawer pulls. In case you have a separate room / garage where you could set all doors upon the workbenches, empty boxes or milk crates, thereby, the task of painting could be done easily. Stained cupboards finished with upper coating of polyurethane or clear varnish may need extra prep works, prior to painting them. Such kind of finishes often are polished like the furniture which might have a oil or wax build-up on their surface that interferes with binding the paint, that you propose to apply. To eliminate this oil or wax, make use of rags drenched in the denatured alcohol for wiping all the surfaces thoroughly. Then sand the surfaces with the 220-grit sandpaper for roughing it slightly to help paint adhere well. After sanding, just wipe all surfaces once again using denatured alcohol for removing wax or oil residue or sand. So, after the alcohol gets evaporated, proceed to paint. If you want to paint previously unfinished cupboards or wood that had been finished naturally, just proceed to apply four coats of paint for getting a professional look. In fact this is true, if youre painting the cupboards white that has been in style factor these days. The interior of drawer and white cupboards can be painted with 3 coats of paint but ensure to do the outer side rightly to have kitchen cupboards that speaks proudly of you. Finally, re-install all the hardwares and hang all doors well. So, now all is well with your white kitchen cupboards.
Published at Tuesday, May 16th 2017, 19:04:23 PM. Cupboard By justin. Bathroom Design: Why You Should Incorporate Soft Close Draws and Cupboards in Your New Bathroom Soft close cupboard doors and soft close cabinet draws are two innovative and new products that can be incorporated into your bathroom design. They both are inexpensive design products, yet they have the look and feel of top end high priced products for your bathroom project. There is no need to purchase an entire new set of cupboards for your bathroom, as the soft close cupboard doors and soft close draws go right over our existing bathroom features. This is why they are less than remodeling and a whole lot easier as well. You dont need any fancy hinges, screws, or draw slides either as these products come with all you will need to spruce up your bathroom design. They are quick and simple to install and only take a few minutes and come with the complete and easy directions for your convenience. The soft close draw and soft close cupboard doors have been fully tested and are proven to be durable, so will last for years to come. These look great in your bathroom and keep your cupboards and drawers from slamming shut. No more pinched fingers or noisy problems. It also makes for less damage to your cupboards too. The Soft close draws will fit onto just about any brand of cupboard whether they are frame or frameless styles and fit right onto your old hinge in the upper section of the corner and attach instantly and smoothly in seconds. They are rated to uphold for more than 40,000 openings and closings, so you know they are going to last and last. They also have a lifetime guarantee as well, so you can feel good about adding them to your bathroom design project. When you start your bathroom design project, you need to order one soft draw pull for each drawer that is 22 inches or less and two for every one that is more than 22 inches. Thats all that is needed to make your old drawers as good as new and make them shut more smoothly and more quietly too. As for the soft close cupboard doors, you just need one for each door, so just count the number of doors and drawers in your bathroom cupboard and you are good to go for your next order. If you are unsure of how to install them, you can even watch videos online that will give you a step by step showing of how to put both products on in your bathroom. So, no matter if you merely are doing something to bet a bit of an updated look and feel in your bathroom or you are concerned about your children pinching their fingers or you just want a drawer or door that shuts more quietly, these great products are made to do the job for you with no trouble at all and not a great expense to your wallet either. So, be sure to order some of these soft close cupboard doors and soft close cabinet draws today to complete your next bathroom design product. Design Time Nottingham, the specialist for fitting Bathrooms Nottingham Design Time Nottingham, why not check out our Virtual Tour on our Google+ page Nottingham Kitchens
Published at Tuesday, May 16th 2017, 18:40:23 PM. Cupboard By steven. Beautiful Cupboard Handles for Giving Your Old Furniture a Whole New Look Furnishing your home can be a tedious and costly process. Choose to simplify this process for both your wallet and the environment, by reusing parts that you own already. With a little creativity, you can return a used item or forgotten in a custom for your home with little money. The main idea in renewing old furniture is to get new, not very expensive, beautiful cupboard handles. From wood, from plastic, brown, pink, big, small, transparent or not, cupboard handles are known for giving a new glam to your old furniture. The key to a decorative furniture reuse is to look beyond the current sad state it is in, and to imagine what it could become by adding colorful and live cupboard handles. Do not let old furniture with broken handles and a few scratches stop you. Use guides that you could simplify your work. In some ways the piece speaks for itself, listen up! Reuse is an organic way to show your individual style, so be careful on what attracts you and decorate with love. If you love the curved edge of an otherwise ugly cupboard, imagine how it would look with new handles and a new paint job. If the clean lines of an art deco-inspired wardrobe tempt you, prepare to give it a lift. There are numerous styles of handles, but its up to you and your personality to see which ones you want to get: wood cupboard handles, metal, even glass cupboard handles in every shape and size that you can imagine. The most important thing you need to take into account is whether the structure of the furniture is in good enough condition so that you can give them new handles. For couches and chairs, make sure that frames are strong and that springs are intact (if applicable to the situation). To repair the foundation of furniture is a much more expensive process. For wood pieces such as cupboards, tables and cabinets, you can fix the legs and shelves, but the major cracks in the wood can be difficult to repair. Youll be amazed at how much glow you can find by doing a little sanding and painting. Also consider the cupboard handles to fit well to the old look, in order to not make it look ugly. There is a large amount of handles to choose from, such as: handles with Swarovski crystals, gold/silver handles, wood and plastic available in every color imaginable. So be wise when choosing good handles, because they will totally change the appearance of your home. Choose aluminum handles if your kitchen is a modern one and choose classic round metal handles if your kitchen is a classic one. Dont hesitate any longer and choose the best on the market! Renew your homes look by getting beautiful cupboard handles instead of renewing your whole furniture. Its less expensive and you will simply adore the results!
Published at Tuesday, May 16th 2017, 17:36:23 PM. Cupboard By justin. Kitchen Cupboard Buying Tips I think it is safe to say that it is common knowledge that a kitchen cupboard can serve different purposes, depending on the kitchen where it is used. This is the first thing that you need to take into account when going out to buy one, or more for yourself. Generally, people look for a pleasant design in these items. A kitchen cupboard can come in a wide variety of styles and designs. The cost will also range depending on the style and the material that the cupboard will feature. It is very important that the design of the kitchen cupboard will go well with the décor of your kitchen. The majority of people prefer kitchen cupboard that are flexible in both functionality and design. People now prefer kitchen cupboards that feature quality wood materials. If youre choosing to go with this design, then it is best that you choose a cupboard that features more exotic wood materials since it offers the best look. Durability shouldnt be ignored, thus it is recommended that you get a kitchen cabinet which features stainless steel edges. Be sure to lay out all of your necessities before actually purchasing or designing one! Once you know what you need, be sure to pick a kitchen cupboard that will fulfill these needs. The best strategy is to make a small list with all the things that you will be using it for, things such as wine storage or utensil storage. Such a list will be of great help when going out to buy the right kitchen cabinet for you. A great cupboard will add a lot to the functionality of your kitchen by helping you keep things more organized and be more productive. A good cupboard will provide all of these things no matter the size of your kitchen! Keep in mind that deciding on the kitchen cupboard that you wish to purchase will be yours only and you need to put some thought into it if you want to ensure that you will buy a quality and useful product. If youre not sure about which design to go for, then you should consider buying something that goes well with the existing décor. A pleasant look is also important and you should make sure that your kitchen looks right. There are a lot of styles that you can go for, then main ones being modern, classic and contemporary.
Published at Tuesday, May 16th 2017, 16:48:23 PM. Cupboard By tommy. Preparation Is the Key to Painting Cupboards Successfully In thirty years of remodeling cabinets, Ive learned that preparation is one of the most important aspects of painting kitchen or bathroom cupboards. In this article, we will explore a few of the things that can really make a difference in how the painting project will look when it is all done. IMPORTANT: DO NOT RUSH through this renovation. Allowing plenty of time to do it right is essential to the success of having your kitchen or bathroom cupboards look new again. Cleaning the Cupboards Mix a solution of Dawn dish washing detergent and water to wash your cupboards with. The areas around the stove and hood should be gone over several times to ensure that all of the grease buildup is removed. If you are preparing Formica surfaces, you can use lacquer thinner on them to remove grease build-up. Using Wood Putty and Caulking You are going to have to remove the cabinet doors and you should replace all of the hinges, handles or knobs while renovating the cupboards. This is probably going to leave a few holes that will need to be filled with wood filler. You should sand the areas down before placing the filler in the holes and allow sufficient time for it to completely dry. Use the wood filler on every crack and crevice that you can find. You should also caulk around all areas where the cupboards meet the walls, ceiling and floors. Be sure to wipe the access caulking off really well with a damp rag. You only want to fill the void areas. If it is necessary to rinse the rag out a few times because of all of the caulking thats OK. Just get it all off of the cupboards, walls, floor and ceiling. Sanding the Cabinets Once the wood putty is thoroughly dry, sand those areas first so that they are nice and flush. If you need to add more filler, DO NOT omit this step. Every inch of the cupboards should be sanded that will be painted. There is an optional product that can be used here, but you must check with your local paint supply company to ensure that it will work with the materials that your cupboards are made of. You can apply a liquid deglosser that will work almost as good as sanding the cupboards. Granted, you will still need to use sandpaper for the places you applied the putty to. Repeating the Process Once you have cleaned the cupboards, filled all of the blemishes and thoroughly sanded them, repeat all of these steps again. This is known as going over them with a fine-toothed comb. Trust me, this is what makes the difference between the do-it-yourself look or obtaining professional results. Applying the First Coat of Primer Painting the cupboards with a thin coat of primer is the next step. Allow the paint to completely dry. Fill any blemishes with filler and sand them out again. Repeat this process of applying the paint primer, filling flaws and sanding them out until the cupboards are literally "spotless." Now the process of painting the finish coats on the cupboards can begin. Its important to realize that the final coats of paint will only look as good as the surface is underneath. If theres a run, dip, depression or scratch anywhere in the primers surface, the exact same flaw will be seen when the finish coats of paint are applied to the cabinetry.